|
Product Information
Available mainly in 6A2 and 1A1 shape, but other shapes
such as 11A2, 11V9, 14A1 etc. are available on request. Our continuous bond development in the field of vitrified wheels has
made us one of the most successful manufacturers of this product in Europe. Unlike most manufacturers of Vitrified wheels,
we have a whole range of bonds available to suit your particular grinding requirements. In addition we have developed a new
range of 1A1 Vitrified wheels for CNC flute grinding applications and a range of internal grinding wheels.
If you are unfamiliar with the possible applications
for Vitrified Wheels, the following list outlines these in general:
Application: Diamond Tool Manufacture
- Suitable for grinding Polycrystalline Diamond Tools
- Common Machines are COBORN and EWAG
- Normally 6A2 shape (but other shapes available)
- Normal diameters 100mm, 125mm, 150mm (but others available)
- Face Width 3, 5, 10, 15, 20, 25mm (but others available)
- Layer Depth 4, 6, 10mm (but others available)
- Common Diamond Grit Sizes:
|
|
Application: Bore Grinding - Solid
Carbide
- Wet grinding only
- Diameters up to 75mm
- Carbide only - not steel or braze
- High stock removal
- Long life
- Example wheel size D1A1/38/10/6.35
- Example Rim Spec: D151-C100
Application: CNC Flute Grinding
of Carbide Drills, Reamers and Routers
- Typical machines: WALTER, ANCA, DECKEL, SCHNEEBERGER
- Wet grinding with flood oil
- Higher stock removal than Resin-Bond Diamond
- Shorter cycle times than Resin-Bond
- Superior edge retention
- Example wheel size: D1A1/100/10/20
- Example Rim Spec: D91-C100
|
